Cart
Checkout Secure

Coupon Code: SAVE10PA Copy Code

 

Free Shipping Over $x to  

6J1 Tube Amplifier | Bile Preamplifier | HIFI Treble Bass Adjustment Amplifier | Audio Preamplifier | DC12V For Amplifier Speaker

sold in last hours
Your Price:
$68.99 $79.95

25664049-silver-us-plug
Quantity
 
Checkout Secure
Checkout Secure
Order in the next  to get it by 

Viewing This Product

 

5 Great reasons to buy from us:

  • Image of Secure Ordering
  • Image of 365-Day Money-Back Guarantee
  • Image of 100% Satisfaction Guaranteed
  • Image of Easy Returns
  • Image of Free shipping (when you spend over XXX)

Item specifics:

Maximum Power Per Channel: NO POWER
Model Number: 6J1 Tube Amplifier Bile Preamplifier
Channels: 2 (2.0)
Package: Yes

Product Description:

Item-Description

Product description:

Chips: NE5532+6J1 tube

Treble adjustment: ±6db
 
Bass adjustment: ±10db
 
Power supply: DC12V/1A ,more than 12V will burn out the diode.
 
Frequency response range: 20Hz-20kHz (±3db)
 
Distortion: ≤0.3%
 
Input sensitivity:0.2mV
 
SNR:≥101dB
 
TND:0.1%
 
Control:Potentiometer knob and toggle switch
 
Audio input/ Audio output:Gold-plated RCA
 
​Preamp gain:5 times
 
Size: 118.5*98*33MM
 
 
Operation steps:
 
1. Make sure the VOL knob is at its minimum.
 
2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, check whether the lower pin is deformed before installing the tube, and the deformation can be reversed by hand).
 
3. Connect the audio source you want to use to the audio input connector.
 
4. Connect the rear-end device that needs an external connection to the audio output connector.
 
5. Connect the DC12V power supply.
 
6. Turn the switch on and off to turn it on.
 
7. Turn the knob clockwise to select the desired volume level and high and low volume.
Product questions:
1. All the lines are connected, but there is no sound output?
 
1. Check if the POWER indicator is on. If it is not lit, turn the switch on. After pressing the power button, the indicator light still does not light up. At this time, you can find an equivalent voltage output (must be 12V) and test again.
 
2. If the indicator light is on, check if the VOL knob is in the minimum state, such as clockwise rotation in the minimum state.
 
3. If both of the above are normal, check if the playback device of the input source is paused, muted, or the volume is at its minimum.
 
 
2.Why is the sound broken?
 
A: This product is a pre-stage product, and it also has amplifying effect. If the volume of the rear-end device is adjusted to the maximum and the pre-stage is also adjusted to the maximum, it is easy to be distorted. At this time, you only need to move the pre- or post-level. The volume can be adjusted smaller.
 
 
3.Why is the volume of the machine unchanged, and the sound source is different when accessing different audio sources (such as connecting the CD first and then changing to the mobile phone)?
 
A: The amplitude of the output signal of different playback devices is different. For example, the mobile phone is usually 0.35MV, and the CD is 1V. The natural sound size is different.
 
 
4.Why does the speaker have a large current sound?
 
A: If you are not using the original standard power supply, please replace the power supply before testing. Many power supplies in the market have a large interference coefficient, which will cause a large current sound.
 
 
5.Why do I not play the sound source after I plug in the input cable, and the speaker will have a loud beep?
 
Answer: When the unshielded signal line is used, the interference signal will enter the amplifier for amplification. If you hate this sound, you are advised to replace the shielded signal line or unplug the signal line.
 
 
6.Why did the pre-biliary level buy back and start listening to the sound is very hard, the tri-band is not very clear, but after 1 day, it is normal?
 
A: The electron tube is a very sensitive device. The temperature should generally reach a certain level to achieve the best effect. Therefore, the sound is very natural after about half an hour of warming up.
 
 
7.Can I replace the tube upgrade?
 
A: Yes, at present, we have tested and matched 6K4/6J4/GE5654/6AK5/6*1n, which can be directly replaced. Different tube sounds will be very different.
 
 
8. Can I replace the tube with the power supply?
 
A: No, it is very easy to burn out the tube because the inside of the machine is working at high voltage. If the hot-swappable tube is burnt out, it may damage the machine.
 
 
9.Can this machine be connected to a phonograph/record player?
 
A: At present, this does not support the signal input of the phonograph/record player. Because the amplitude of the output signal of the phonograph/recorder is very small, it is necessary to increase the phono amplifier.
 
 
Note:
 
1. Do not open the case privately. Improper handling may result in electric shock.
 
2. Please use the switching power supply of the regular manufacturer, otherwise the risk of damage to the machine will be damaged.
 
3. Do not place the machine in a high temperature and high humidity environment.
 
4. Do not plug or replace the replacement tube while the power is on, otherwise it will burn your tube and machine.
 
5. Do not replace the tube type that does not match, otherwise it will burn your tube and machine.
 
 
When you use it in the car, pay attention to it, and when it starts to fire, it will reach 13.5V. If you want to use it, the fire is activated after the boot.

Package included:

1PC 6J1 Tube preamplifer + 1PC DC12V 1A Power Adapter

 

Item-Picture

img_1img_6img_7img_3img_5img_4img_8img_10img_11

 

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.63kg (1.39lb.)
  • Package Size: 12cm x 10cm x 10cm (4.72in x 3.94in x 3.94in)
Shipping
 This Item Ships to 
Delivery

Estimated between  and

Will usually ship within 1 business day.

   

Please allow 5~20 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

Here are 5 more great reasons to buy from us:

so
   

You get a full 365 days to return your item to us. If it doesn't fit, it breaks, you've changed your mind or for no reason whatsoever simply send it back to us and we'll cheerfully refund you every cent.

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

Ordering from [yourstorename] is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.

Item specifics:

Maximum Power Per Channel: NO POWER
Model Number: 6J1 Tube Amplifier Bile Preamplifier
Channels: 2 (2.0)
Package: Yes

Product Description:

Item-Description

Product description:

Chips: NE5532+6J1 tube

Treble adjustment: ±6db
 
Bass adjustment: ±10db
 
Power supply: DC12V/1A ,more than 12V will burn out the diode.
 
Frequency response range: 20Hz-20kHz (±3db)
 
Distortion: ≤0.3%
 
Input sensitivity:0.2mV
 
SNR:≥101dB
 
TND:0.1%
 
Control:Potentiometer knob and toggle switch
 
Audio input/ Audio output:Gold-plated RCA
 
​Preamp gain:5 times
 
Size: 118.5*98*33MM
 
 
Operation steps:
 
1. Make sure the VOL knob is at its minimum.
 
2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, check whether the lower pin is deformed before installing the tube, and the deformation can be reversed by hand).
 
3. Connect the audio source you want to use to the audio input connector.
 
4. Connect the rear-end device that needs an external connection to the audio output connector.
 
5. Connect the DC12V power supply.
 
6. Turn the switch on and off to turn it on.
 
7. Turn the knob clockwise to select the desired volume level and high and low volume.
Product questions:
1. All the lines are connected, but there is no sound output?
 
1. Check if the POWER indicator is on. If it is not lit, turn the switch on. After pressing the power button, the indicator light still does not light up. At this time, you can find an equivalent voltage output (must be 12V) and test again.
 
2. If the indicator light is on, check if the VOL knob is in the minimum state, such as clockwise rotation in the minimum state.
 
3. If both of the above are normal, check if the playback device of the input source is paused, muted, or the volume is at its minimum.
 
 
2.Why is the sound broken?
 
A: This product is a pre-stage product, and it also has amplifying effect. If the volume of the rear-end device is adjusted to the maximum and the pre-stage is also adjusted to the maximum, it is easy to be distorted. At this time, you only need to move the pre- or post-level. The volume can be adjusted smaller.
 
 
3.Why is the volume of the machine unchanged, and the sound source is different when accessing different audio sources (such as connecting the CD first and then changing to the mobile phone)?
 
A: The amplitude of the output signal of different playback devices is different. For example, the mobile phone is usually 0.35MV, and the CD is 1V. The natural sound size is different.
 
 
4.Why does the speaker have a large current sound?
 
A: If you are not using the original standard power supply, please replace the power supply before testing. Many power supplies in the market have a large interference coefficient, which will cause a large current sound.
 
 
5.Why do I not play the sound source after I plug in the input cable, and the speaker will have a loud beep?
 
Answer: When the unshielded signal line is used, the interference signal will enter the amplifier for amplification. If you hate this sound, you are advised to replace the shielded signal line or unplug the signal line.
 
 
6.Why did the pre-biliary level buy back and start listening to the sound is very hard, the tri-band is not very clear, but after 1 day, it is normal?
 
A: The electron tube is a very sensitive device. The temperature should generally reach a certain level to achieve the best effect. Therefore, the sound is very natural after about half an hour of warming up.
 
 
7.Can I replace the tube upgrade?
 
A: Yes, at present, we have tested and matched 6K4/6J4/GE5654/6AK5/6*1n, which can be directly replaced. Different tube sounds will be very different.
 
 
8. Can I replace the tube with the power supply?
 
A: No, it is very easy to burn out the tube because the inside of the machine is working at high voltage. If the hot-swappable tube is burnt out, it may damage the machine.
 
 
9.Can this machine be connected to a phonograph/record player?
 
A: At present, this does not support the signal input of the phonograph/record player. Because the amplitude of the output signal of the phonograph/recorder is very small, it is necessary to increase the phono amplifier.
 
 
Note:
 
1. Do not open the case privately. Improper handling may result in electric shock.
 
2. Please use the switching power supply of the regular manufacturer, otherwise the risk of damage to the machine will be damaged.
 
3. Do not place the machine in a high temperature and high humidity environment.
 
4. Do not plug or replace the replacement tube while the power is on, otherwise it will burn your tube and machine.
 
5. Do not replace the tube type that does not match, otherwise it will burn your tube and machine.
 
 
When you use it in the car, pay attention to it, and when it starts to fire, it will reach 13.5V. If you want to use it, the fire is activated after the boot.

Package included:

1PC 6J1 Tube preamplifer + 1PC DC12V 1A Power Adapter

 

Item-Picture

img_1img_6img_7img_3img_5img_4img_8img_10img_11

 

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.63kg (1.39lb.)
  • Package Size: 12cm x 10cm x 10cm (4.72in x 3.94in x 3.94in)
Shipping
This Item Ships to   
Delivery

Estimated between  and

Will usually ship within 1 business day.

   

Please allow 5~20 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

Here are 5 more great reasons to buy from us:

so
   

You get a full 365 days to return your item to us. If it doesn't fit, it breaks, you've changed your mind or for no reason whatsoever simply send it back to us and we'll cheerfully refund you every cent.

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

Ordering from [yourstorename] is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.

Related Products

Added to cart!
Spend $x to Unlock Free Shipping Free shipping when you order over XX You Have Qualified for Free Shipping Spend $x to Unlock Free Shipping You Have Achieved Free Shipping Free Shipping For Over $x to Free Shipping Over $x to You Have Achieved Free Shipping Free shipping when you order over XX ou Have Qualified for Free Shipping
Spin to win Spinner icon